Feiyue FSOM series of non-leakage magnetic drive centrifugal chemical process pumps, applying the principle of magnetism to achieve non-contact transmission of torque, eliminating the shaft sealing device (filler seal or mechanical seal) of traditional centrifugal pumps, and replacing static seals with static seals to achieve Fully sealed and leak-free new chemical process pump. Pump materials: 304, 316, 904L, dual-phase steel, titanium alloy, Monel, nickel, Hastelloy, etc.

Product features:

1. Structure and performance: The magnetic pump produced by our company adopts a unique dense, concentrated magnetic, magnetically coupled magnetic drive device. This coupling structure is similar to the decentralized and gap type commonly used by similar products in advanced countries in the world. Compared with the driving device coupled with the phase-absorbing magnetic circuit, it has the advantages of small size, large torque, small eddy current, high transmission efficiency and good reliability (on the magnetic circuit structure, eliminating the possibility of slippage), which completely overcomes their defect.

2. The efficiency of the pump is generally higher than that of similar products by 5 to 10%. The magnetic drive device adopts patented technology to carry out a series of optimized designs, and uses unique processes and manufacturing to combine various losses that affect the efficiency of the magnetic pump Reduced to the minimum, so that the efficiency of the centrifugal magnetic pump is basically the same as the efficiency of the shaft seal type.

3. Low natural wear rate and long maintenance-free period: with a unique set of axial force balance system of magnetic pump, the axial force is almost zero, which can make the thrust bearing end face and sliding bearing end face only in the long-term operation of the pump There is very slight mechanical friction, so the natural wear rate is low, the failure rate is low, and the maintenance-free cycle is long.

4. The vibration and noise of the pump are lower than similar products.

The use of the product:

It can be widely used in the production process of chemical, petrochemical, pharmaceutical, printing and dyeing and other fields to convey clean liquids that do not contain particles and have a specific gravity of no more than 1.84, and are particularly suitable for flammable, explosive, toxic, harmful, corrosive and precious liquids Media delivery. The non-leakage magnetic pump is an ideal green chemical equipment. It will bring about higher economic benefits and savings in the areas of chemical industry, petrochemicals, pharmaceuticals, printing and dyeing industries, increasing production and saving, eliminating pollution, protecting the environment, safe production and labor protection. Social benefits. FSOM series magnetic drive centrifugal chemical process pump is a standard non-leakage centrifugal pump, which can replace the centrifugal pump with shaft seal and shielded electric pump.

Performance range: flow: 5.5-2000m3/h; head: 16-168m; power: 1.5-900kw;

Applicable temperature: -30～350℃;

Optional accessories: temperature monitoring device, anti-air running device, leakage monitoring device;

Note: When the specific gravity of the medium is greater than 1.3mg/cm3, it should be stated when ordering. It is forbidden to run dry, and it is forbidden to transport medium containing particles or crystals.