FNKM wear-resistant particle magnetic pump-BB2 magnetic pump series-Jiangsu Feiyue Machine And Pumps Group Co., Ltd.

CURRENT LOCATION：Home > Product > LJYA series slurry pump > BB2 magnetic pump series

: FNKM wear-resistant particle magnetic pump

FNKM series vertical magnetic drive submersible pump is a high-tech environmental protection energy-

National Service Hotline：400-0523-588

Product description
Structure diagram
Parameters Table
Case

FNKM series vertical magnetic drive submersible pump is a high-tech environmental protection energy-saving new product independently developed by our company with international advanced technology level and filling the domestic gap.

1. Replace the dynamic shaft seal with a static shaft seal, so that the pump's over-current parts are completely sealed without leakage.

2. Adopt special dense, concentrating type, push-pull magnetic circuit coupling magnetic drive device, which has the advantages of compact structure, small volume, large torque, high magnetic transmission efficiency, stable and reliable operation and so on.

3. Non-metallic insulating sleeves made of special materials will not produce electromagnetic eddy current heat and demagnetization and demagnetization.

4. Grease-free lubricated bearings are used in the bearing housing. At the same time, N2 air seals are used between the bearings to prevent leakage of medium vapor. The pump can be run dry, which reduces the wear rate and failure rate of the pump and extends the life cycle of the pump.

5. The auxiliary impeller is set on the back of the main impeller, which reduces the back pressure of the impeller during pump operation. At the same time, the unique axial force balance method is used to balance the axial force of the pump. A small amount of the remaining axial force is borne by the grease-free lubricating bearing. Improve the reliability and stability of the pump operation.

Manufacturing standard: implement ISO2858/HG/T 2730－2012 standard.

Performance range: design pressure 1.6-2.5Mpa; flow rate 1.8-300m3/h; head 15-125m; power 1.5-160kw;

Applicable temperature: -20～280℃;